FIG Commission 6 - Engineering Surveys |
|||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||
Proceedings
20225th Joint International Symposium on Deformation Monitoring
(JISDM2022)
|
|||||||||||||||||||||||||||||||||||||
 |
The joint symposium was organized by the Universitat Politècnica de València, Spain, and was supported by FIG (WG 6.1), IAG, and ISPRS. JISDM2022 topics were related to technical, methodological, and practical advances in the field of deformation monitoring tackling landslides, debris flows and rockfalls, large engineering structures, metrology, and tangible cultural heritage in archaeology and architecture.
|
15-17 May 2019, Athens, Greece
 |
The joint symposium was organized by the School of Rural and Surveying Engineering of the National Technical University of Athens and was supported by FIG (WG 6.1), IAG and ISPRS. The presentations covered several topics that included: quality control, quality assurance and optimization techniques in deformation analysis; point cloud-based space-temporal deformations; reference frames and geodynamics; cultural heritage/ bridge / dam / geohazards monitoring; multi-sensor systems and new concepts for deformation measurements; UAV for change detection and deformation monitoring. |
18 - 20 October 2017, Lisbon, Portugal
 |
The conference by the Faculty of Civil Engineering Slovak University of Technology in Bratislava, the FIG C6 (Engineering Surveys) and the National Laboratory for Civil Engineering of Portugal. The presentations covered several topics that included: engineering surveying; structures monitoring; trends in methodology and development of technology; quality control of data. |
30 March - 1 April, Vienna, Austria
 |
The Symposium was organized by the FIG Working Group 6.1 (Deformation Measurement), the IAG Sub-Commissions 4.2 (Geodesy in Geospatial Mapping and Engineering) and the Joint Working Group 0.2.1 (New Technologies for Disaster Monitoring and Management). One aim of the symposium was to highlight contributions from different fields of geodesy and geomatics, such as engineering geodesy, spatial geodesy, photogrammetry and remote sensing. Highlights of the conference programme included discussion of scientific progress related to the monitoring of terrain, objects and structures, such as ground subsidence, landslides, glacier movements, bridges, tunnels or wind turbines. |
3-4 April 2014, Prague, Czech Republic
 |
The conference was organized by the Faculty of Civil Engineering Slovak University of Technology in Bratislava, the FIG Commission 6 (Engineering Surveys) and Faculty of Civil Engineering of the Czech Technical University in Prague. The themes included trends in methodology and technology development in engineering surveying; engineering surveying procedures for industry ; lasers and laser measurement systems;new technologies for deformation measurements. |
9-10 September 2013, Nottingham, United Kingdom
 |
The joint symposium was organized by the University of Nottingham, United Kingdom, and was supported by FIG (WG 6.1), IAG, and, for the first time, also by ISPRS. Rapid developments in our professional fields, like modern sensors and sensor networks, real-time processing algorithms, advanced analysis tools, micro-electronics and computer sciences, wireless communications and machine control have significantly changed instrumentation, methodology, and system set-up. The symposium emphasized the high demand to develop new monitoring concepts and solutions to meet the needs of society in minimizing negative environmental impacts. |
22-23 November 2012, Hong Kong, China
 |
The workshop was organized by The Hong Kong Polytechnic University, the FIG Commission 6 (Engineering Surveys) and The University of Nottingham Ningbo China. The themes included: setting out high rise and tall engineering structures; control network using GNSS; structural health monitoring; sensor fusion and analysis. |
2-4 November 201, Kowloon, Hong Kong, China
 |
The join symposium combined the 14th FIG Symposium on Deformation Measurement and Analysis, the 5th IAG Symposium on Geodesy for Geotechnical and Structural Engineering and the 2nd International Workshop on Spatial Information Technologies for Monitoring the Deformation of Large-Scale Man-made Linear Features. It was organized by the Department of Land Surveying and Geo-Informatics of The Hong Kong Polytechnic University, the FIG Working Group 6.1 (Deformation Measurement), the IAG Sub-Commissions 4.2 (Applications of Geodesy in Engineering) 4.4 (Applications of Satellite and Airborne Imaging Systems), and the Engineering Surveying Sub-Society of the Chinese Society for Geodesy, Photogrammetry and Cartography. |
23-30 July 2009, Listvyanka, Russian Federation
 |
The workshop on “Innovative Technologies for an Efficient Geospatial Management of Earth Resources” was organized by FIG Commissions 5 (Positioning and Measurement) and 6 (Engineering Surveys) together with the Siberian State Academy Of Geodesy, the Technische Universität Berlin and the Irkutsk State Technical University. The rapid development of new innovative technologies forces the need for meetings all over the world for better exchange of knowledge regarding efficient usage. To achieve the millennium goals, transmission of knowledge concerning rapid technological changes in geodesy, photogrammetry, GIS, remote sensing, CORS and DGNNS augmentation systems also have to be central to modern educational programmes. |
12-15 May 2008, Lisbon, Portugal
 |
The second jointly held symposium on deformation measurements and analysis was held May 12 – 15, 2008 in Lisbon, Portugal. The symposium was a combined meeting of the FIG Commission 6, Working Group 6.1, Deformation Measurements and Analysis and the IAG Sub-commission 4.2, Applications of Geodesy in Engineering. The theme of the symposium “Measuring the Changes”, reflects the importance, and demand, for fully automated, continuous, and reliable deformation monitoring in the civil engineering, mining, and energy sectors. |
11-13 November, Bratislava, Slovakia
 |
The 3rd International Conference on Engineering Surveying INGEO 2004 was held November 11-13 in Bratislava, Slovakia. INGEO 2004 was organised by FIG Commission 6 and Department of Surveying, SUT, Bratislava, Slovakia. 39 papers were presented and representatives from more than 15 countries participated in this well organized event. |
28 June – 1 July 2004, Nottingham, United Kingdom
 |
The 1st International Symposium on Engineering Surveys for Construction Works and Structural Engineering organised by FIG Commission 6 was held in Nottingham, United Kingdom, 28 June – 1 July 2004. The Symposium was hosted by the Institute of Engineering Surveying and Space Geodesy, University of Nottingham. It included a workshop of the Special Task Force 6.1.1 established under Working Group 6.1, “Measurements and Analysis of Cyclic Deformations and Structural Vibrations”. |
25-28 May 2003, Santorini, Greece
 |
The 11th FIG Symposium on Deformation Measurement was held in Santorini, Greece May 25-28, 2003. This symposium organised by FIG Commission 6 (surveying Engineering) working group on Deformation Measurement has the longest tradition in FIG as a Commission organised event on a certain topic. This time this symposium attracted more than 130 participants from 29 countries – major national groups represented were Polish, Italian and, of course, Greek. Participation of more than 15 delegates, among them students and scientists from less developed countries became possible through grants from the sponsors of the symposium. |
11-13 November, Bratislava, Slovakia
 |
The 2nd International Conference of Engineering Surveying - INGEO 2002 is organised by the Department of Surveying of the Slovak University of Technology and was held in the Congress Centrum of the Slovak Saving Bank in Bratislava. The co-operation with the members of FIG Commission 6, WG6.2 Engineering Surveys for Industry and Research, the Chamber of Surveyors and Cartographers and the Slovak Union of Surveyors contributed to the high level of this conference. The papers were grouped in four major themes: Model Building and Data Processing; Deformation Measurement; Photogrammetry Applications; Sensors and Laser Equipments. |
19-22 March 2001, California, United States
 |
The 10th International Symposium on Deformation Measurements, organized by Commission 6 was held in Orange, California. The symposium was hosted by the metropolitan Water District of Southern California in cooperation with the Department of Geodesy and Geomatics Engineering of the University of New Brunswick, United States Geological Survey, Scripps Institution of Oceanography’s Orbit and Permanent Array Center, and Leica Geosystems. There were numerous technical presentations such as structural deformations, theory of design and analysis of deformation measurements, automation of structural health/deformation monitoring systems and more. In addition to the technical presentations there were poster paper sessions and exhibits by the industry suppliers. |
